Home > Hipot Tester >

dielectric dc high voltage withstand tester

Product Categories

Electronic Component Testers [2]
Impedance Analyzer [12]
Micro Ohm Tester [3]
Benchtop LCR Meter [30]
Hipot Tester [21]
Handheld LCR Meter [6]
Cpacitance Meter [6]
Winding Tester [5]
Cpacitor Leakage Current/IR Meter [2]
Dc Bias Current Source [5]
CV Analyzer [4]
Automatic Transformer Test system [4]
Source Measure Unit SMU [8]
High Resistance Meter [3]
Low Ohm Meter [7]
Digit Multimeter [4]
Insulation Resitance Meter [2]
Battery Resistance Tester [3]
Power Supply [2]
DC Electronic Load Tester [8]
AC DC Power Meter [3]
AC PSU [1]
DC PSU [9]

Changzhou Tonghui Electronic Co., Ltd,

Contact Now

dielectric dc high voltage withstand tester

Product Name : Hipot Tester

Test Accuracy : ±0.5% of reading

Test Current : 0.1mA to 20A

Test Environment : Temperature: 0℃ to 40℃, Humidity: 20% to 80%

Test Frequency : 45Hz to 1MHz

Test Interface : RS232/USB/GPIB

Test Mode : Continuous/Step/Pulse

Test Output : 4-wire/3-wire/2-wire

Test Protection : Over voltage/Over current/Over load/Short circuit

Test Range : 0.1mA to 20A

Test Resolution : 0.1mA

Test Safety : IEC/EN 61010-1/CSA C22.2 No.1010.1

Test Time : 0.1ms to 999.9s

Test Voltage : AC/DC/IR

Test Waveform : Sine/Square/Ramp/Triangle/Noise/Arbitrary

Contact Now

TH9310/20 AC/DC Withstanding Voltage & IR Tester - 4 Testing Modes

TH9310/TH9320 AC/DC Withstanding Voltage & IR

manual,datasheet

--------------------------------------------------------------------------------------------------------------

Features

TH9310 series: AC:5kV/10mA; DC:6kV/5mA AC/ DC withstanding voltage/insulation resistance tester TH9320 series: AC:5kV/20mA; DC6kV/10mA AC/ DC withstanding voltage/insulation resistance tester

TH9310/20:AC/ DC withstanding voltage/insulation resistance tester TH9310A/20A: AC / DC withstanding voltage tester TH9310B/20B: AC withstanding voltage tester

480×272 dot-matrix, TFT-LCD display

Rapidly discharging and arc detection

Randomly set voltage rising time and testing time in 999.9 seconds; Freely set waiting time for insulation resistance

Hold 5 testing steps; 4 testing modes selectable

Brand new operation interface and concise interface operation design

Lock keyboard

PLC interface

Brief Introduction

TH9310/20 series withstanding voltage/insulation resistance tester is an economical and intelligent safety tester with the characteristics of small size, light weight, pleasing appearance and easy operation. TH9310/20 series can be widely used in the safety tests of household appliances, transformer, electrical equipments and components.

--------------------------------------------------------------------------------------------------------------

Changzhou Tonghui Electronics Co., Ltd.

Product Tags: